Frequently Asked Questions ...

If you can't find the answer your looking for here our sales or technical team will be more than happy to answer any questions, Please call us on +44(0) 1484 475 123.

General

What type of fans do you make?

Halifax fan manufacture the highest quality centrifugal fans.

What is the maximum volume your fans can convey?

Volume flow rates up to 450,000 M³/Hr.

What is the maximum pressure your fans can produce?

Pressures up to 25,000 Pa.

What are your fans manufactured from?

Our fans are manufactured from the highest quality carbon and stainless steels, we also have vast experience with Nickel alloys, Aluminium and Titanium.

Where are your fans manufactured?

All our fans are manufactured in our purpose built facility in West Yorkshire. However many of our international and domestic customers are taking advantage of our manufacturing facility in Shenzhen.

All of the fans built in Shenzhen are designed in the UK and are manufactured to full UK specifications and designs. In quality terms the Chinese factory is a mirror of the Brighouse plant and is now fully audited twice annually, by BSI in China, to BSI EN ISO 9001:2000 and is fully supported by regular visits from the Brighouse engineering and manufacturing staff.
Does my fan have to comply with ATEX?

ATEX is a European directive which applies to machinery used in areas where potentially flammable or explosive gasses could be present. We have a set selection of safety provisions that are built in to our fan units allowing us to fully certify them according to the directive.

What industries do you supply?

Chemical, Pharmaceutical, Petroleum, Offshore, Oil and Gas, Power Generation, Incineration, Nuclear, Tobacco, Food, Paper, Steel ... and many more.

What after-sales service can I expect?

At Halifax Fan we have a dedicated team of experienced fan engineers that are on-call and ready to help with any technical queries that you may have, we also have a small team of highly skilled site engineers that can help with maintenance or commissioning.

Can you provide spares?

At Halifax Fan we have a spares department that can provide all spares for any of our fans purchased in the last forty plus years.

Can you replace other manufacturers fans?

Yes, we can probably offer a more efficient, longer-lasting, tailor made machine. Please call our sales engineers for a chat on +44(0) 1484 475 123.

My fan system is not performing, but its not manufactured by Halifax Fan, can you help?

Yes, our wealth of fan knowledge keeps us at the cutting edge of fan science, allowing us to overcome most fan problems. Please call our sales engineers for advice on +44(0) 1484 475 123.

What is the best way to control my fan?

Our fans can be controlled by two methods mainly, By controlling the resistance and flow with a damper or the more efficient method of using a frequency inverter. At Halifax fan we can provide both; our dampers range from simple slide dampers to Inlet vane controllers. The Inverters we supply are designed and matched for our fans, we have very good relations with our Inverter manufacturers allowing us to offer very competitive prices.

Can you work to large specifications or stringent requirements?

At Halifax fan we have a dedicated project department consisting of experienced technical engineers and draughtsmen; set up and trained to handle large specifications and customer requirements that call for most stringent of details.

Do you sell Axial fans?

We do not sell Axial fans, we do sell a small range of Bifurcated axial fans that have the benefits of motor out of the air stream.

Do you sell roof extract or wall extract fans?

No, our expertise is concentrated on standard and bespoke centrifugal fans.

ATEX

What is ATEX?

ATEX 94/9/EC is the directive on equipment and protective systems intended for use in potentially explosive atmospheres.

Can you certify fans?

Yes, Halifax Fan has been producing fans to the ATEX requirements for Group II equipment with gas and dust hazards for some time now and is one of the leading manufacturers in Europe.

Is ATEX a legal requirement?

As of  the 1 July 2003. The directive is now EU law and any equipment, electrical or mechanical for installation within the EU member states must now comply.

Where do I start?

ATEX is not only applicable to fans. Users of ATEX fans should also be aware of the implications in respect of their own installations. Our technical paper “Implications for Manufacturers” which was presented to the Institute of Mechanical Engineers in 2003 includes important information for fan users.

As part of the ATEX Directive we have a duty to liaise with our customers and obtain particular information to enable us to select fans of the correct category and certification to satisfy application requirements. To assist you with your enquiries and to help us formulate an appropriate proposal, we offer our “ATEX Fan Enquiry Form” for completion and submission. Although this form is not mandatory, it is offered as an ‘aide memoir’ and as a basis to discuss and agree your requirements.